Installation & Assembly (Ottoman)

Insert Seat Panel (E) into assembled Ottoman frame as pictured above.
Attach Seat Panel (E) to Side Panels (D) using Screws (⑤) with Allen Key (⑥).
Note: Insert Screws (⑤) from inside to outside of Seat Panel (E).
Do not fully tighten the Screws.
Step 3
Place Leg Panel (C) facedown as pictured above.
Step 2.1 Attach Side Panels (D) to Leg Panel (C) using Bolts („④) with Allen
Key(†⑥).
Step 2.2: Place the remaining Leg Panel (C) facedown then attach the pre-
assembled frame in step 2.1 to Leg Panel (C) using Bolts („④) with Allen Key(†⑥) as
shown above.
Do not fully tighten the Bolts.
Step 2
Step 2.1
Step 2.2
4 of 6