Installation & Assembly

ManualsBrandsLatitude Run ManualsChairs & SeatingKanika 31.1'' Wide Power Lift Assist Standard Recliner with Massager

Lift Recliner Assembly Instruction

A B C D

Chair base Backrest Left and right armrest

Massage andlift remote control and Power

cord

Step 1: Step 2:

Position the armrest, Put the armrests fits into the seat, you will

hear a "click" when it is in place.

Insert the back on the seat. Gently push down until the back locks into

position.

-1-

Summary of content (4 pages)

PAGE 1
Lift Recliner Assembly Instruction A B Chair base C D Backrest Left and right armrest Step 1: Massage andlift remote control and Power cord Step 2: Position the armrest, Put the armrests fits into the seat, you will hear a "click" when it is in place. -1- Insert the back on the seat. Gently push down until the back locks into position.
PAGE 2
Lift Recliner Assembly Instruction Step 3: No.1 and No.2 wire connect with the backrest and chair base. No.3 wire connects with backrest and power cord(Big). No.4 wire connects with backrest and massage remote control. How to use remote control? POWER : Turn on/off remote control HEAT : Turn on/off heat function for lumbar part only.
PAGE 3
Lift Recliner Assembly Instruction Step 3: Connect the supply cable pins. Fits the pins properly in the manner shown in the image. Do not force them, they only have one correct position. Please keep all wires coming out at the bottom of the frame Instruction of Lift Remote Control 1. Please press the button If you keep pressing the button, the lift chair will rise up and forward until it elevates you a standing position. ,the backrest will move down the legrest will rise up. -3- 2.
PAGE 4
Lift Recliner Assembly Instruction The pins must be connected correctly. If the lift chair doesn't work when you finally turn it on, it is because the pins have been connected incorrectly. If that should happen, turn the power off and reconnect the pins. Never set the lift chair in wet / damp areas or where dust can accumulate because these could cause an electrical fault or a mechanical dysfunction. Never use the lift chair inside your home if the room temperature is over 90°F.