TOOLS REQUIRED Phillips Screwdriver (Not Included) Hammer (Not Included) 2 - Persons Recommended ASSEMBLY RATING EASY DIFFICULT The Assembly Rating is a 5-point system showing the level of effort needed to assemble a specific product.
/ 14
ASSEMBLY CARE ADVICE FAILURE TO FOLLOW THE GUIDELINES BELOW MAY RESULT IN INJURY AND/OR PROPERTY DAMAGE. Turn clockwise to tighten and only tighten when step is completed or when instructed to do so. Position each part correctly and insert screws or bolts into their respective holes. Use the appropriate hand tools or power tools for assembly. Select steps, such as tightening screws and/or bolts, may require hand tools to avoid causing damage during assembly.
/ 14
TV STAND A B K C PARTS A 1PC E 1PC B 1PC F 2PCS C 1PC G 1PC D 1PC H 1PC I 1PC J 2PCS K 3PCS L 3PCS ACCESSORIES HARDWARE 1 12PCS 2 12PCS 3 12PCS 4 22PCS 5 4PCS 6 4PCS 7 3PCS 8 6PCS 0.67" 13 6PCS 9 3PCS 10 3PCS A1 3PCS 4.01" 1.97" 11 6PCS 12 36PCS 0.39" 0.47" 14 6PCS 0.75" 6 / 14 A2 6PCS A3 6PCS 1.
GET READY Please group boards as below.
1 Hardware 1 Hardware 7 Hardware 8 Hardware 11 Hardware 12 1 A x12PCS x3PCS x6PCS x6PCS x18PCS B 1 8 1 8 7 X3 E 12 11 12 12 X6 8 / 14
2 C 3 Hardware 3 x12PCS D 3 3 3 3 A6 F 3 X2 OPTIONAL 3 Apply a dab of glue into dowel holes of panels before inserting dowels (#3).
4 D Part E x1PC Part G x2PCS Part H x1PC Part I x1PC H 4 E Hardware 4 x10PCS 4 G Accessory A4 x1PC I C Front 4 4 Top 4 A4 5 Accessory A3 x6PCS J A3 I Front A3 A3 J A3 Top A3 C A3 10 / 14
6 Top L Part B x1PC Part F x2PCS Part L x3PCS D Front L H Hardware 2 x8PCS Hardware 4 x4PCS L G Accessory A4 x1PC C B F 4 F Front 4 Top 4 A4 4 Flip 90° Top Front B D 2 2 G 1 H 2 2 C 2 Please refer to page 5 for detailed instructions on how to fasten cam locks (#2) to cam bolts (#1).
7 Part A x1PC Hardware 2 x4PCS Hardware 5 x4PCS Hardware 6 x4PCS Top Front Accessory A5 x4PCS 5 A J F 6 2 F X4 2 J C 1 2 Use the provided stickers (#A5) to cover exposed locks.
8 Part K x3PCS Top Hardware 9 x3PCS Hardware 10 x3PCS Hardware 12 x18PCS Front Accessory A1 x3PCS Accessory A2 x6PCS 10 9 X3 K K A2 K A2 12 A1 12 12 X3 X6 13 / 14
9 Top Front Hardware 13 x6PCS Hardware 14 x6PCS L L 13 14 L Insert fixative plates (#13) through the thin lined gaps between back and side panels, then secure by using screws (#14). [ No pre-drilled holes ] X6 10 ASSEMBLY COMPLETED Please ensure the furniture rests on an even and flat surface. If the produst wobbles or feels loose,double-check all bolts and/or screws are properly tightened and secured.
