Owner Manual
Page 6 of
13
Step 1:
Check that the control knob (13) for the gas
supply system is turned to the “OFF”
position before starting any assembly.
Step 2:
Place a 20 lbs Propane Gas Tank (not
included) into a secure position.Put it into the
tank holder (17).Turn the wing screw on the
outside of the tank holder (17) clockwise to
tighten the tank into the tank holder.
DANGER
Propane tank must be a minimum of 60
inches away at all times.
Step 3:
Turn the cylinder valve (21) on the tank
clockwise direction to TURN OFF SUPPLY of
the LP Gas supply-Attach the pressembled
Regulator(12/19) from the Fire Table to the
Cylinder Value(21) by turning the Black
Regulator Coupling Nut(20) clockwise.
Make sure it is fastened securely and tighten
connections-by HAND only.
Assembly Instructions
17
13










