Owner Manual

NIGHTSTAND ASSEMBLY INSTRUCTION
Step 3: Attach the assembled part to the front of
Back Panel(③) as shown, make sure two Cam
Bolts(
Ⓐ
) on Back Panel(
③
) are inserted into
Cross Panel(
④
) and Shelf Panel(
⑤
).
Step 4: Attach Top Panel(①) to the top of
assembled part as shown, make sure four Cam
Bolts(
Ⓐ
) on Top Panel(
①
) are inserted into Back
Panel(
③
) and Cross Panel(
④
). Then, attach Bottom
Shelf(
②
) to the assembled part as shown, insert
four Long Bolts(
Ⓑ
) and tighten with supplied
Screwdriver(
Ⓔ
).
Step 5: Flip on the assembled part gently to make it
stand. Turn all Cam Locks(Ⓐ) 1/2 turn (180
degrees) with Screwdriver(
Ⓔ
) to tighten and
assembly is complete.