Owner Manual

NIGHTSTAND ASSEMBLY INSTRUCTION
Step 1: Please assemble this nightstand onto a clean smooth surface
such as carpet or cardboard. Fasten four Wheels(Ⓒ) into the base of Bottom
Shelf(
②
) with Allen Wrench(
Ⓓ
). Fasten eight Cam Bolts(
Ⓐ
) into Top
Panel(
①
), front of Back Panel(
③
) and Cross Panel(
④
) with Screwdriver(
Ⓖ
)
as shown. Make sure all Cam Bolts(
Ⓐ
) are tightened and perpendicular to
the Panels. Insert eight Cam Locks(
Ⓐ
) into the back of Back Panel(
③
),
Cross Panel(
④
) and Shelf Panel(
⑤
) as shown. Then, insert four Embedded
Nuts(
Ⓑ
) into the back of Back Panel(
③
) and Cross Panel(
④
) as shown.
Step 2: Attach Shelf Panel(⑤) to Cross Panel(④), make sure two Cam Bolts(Ⓐ)
on Cross Panel(
④
) are inserted into Shelf Panel(
⑤
), then turn Cam Locks(
Ⓐ
) 1/2
turn (180 degrees) with Screwdriver(
Ⓔ
) to tighten.