NIGHTSTAND ASSEMBLY INSTRUCTION NIGHTSTAND Parts & Hardware
NIGHTSTAND ASSEMBLY INSTRUCTION Step 1: Please assemble this nightstand onto a clean smooth surface such as carpet or cardboard. Fasten four Wheels(Ⓒ) into the base of Bottom Shelf(②) with Allen Wrench(Ⓓ). Fasten eight Cam Bolts(Ⓐ) into Top Panel(①), front of Back Panel(③) and Cross Panel(④) with Screwdriver(Ⓖ) as shown. Make sure all Cam Bolts(Ⓐ) are tightened and perpendicular to the Panels. Insert eight Cam Locks(Ⓐ) into the back of Back Panel(③), Cross Panel(④) and Shelf Panel(⑤) as shown.
NIGHTSTAND ASSEMBLY INSTRUCTION Step 3: Attach the assembled part to the front of Step 4: Attach Top Panel(①) to the top of Back Panel(③) as shown, make sure two Cam assembled part as shown, make sure four Cam Bolts(Ⓐ) on Back Panel(③) are inserted into Bolts(Ⓐ) on Top Panel(①) are inserted into Back Cross Panel(④) and Shelf Panel(⑤). Panel(③) and Cross Panel(④). Then, attach Bottom Shelf(②) to the assembled part as shown, insert four Long Bolts(Ⓑ) and tighten with supplied Screwdriver(Ⓔ).
NIGHTSTAND ASSEMBLY INSTRUCTION PRE-ASSEMBLY (1) Proper assembly of this item requires 2 people. (2) Do not dispose of any contents until assembly is completed to avoid accidentally discarding small parts or hardware. (3) Remove all parts and hardware from box and lay out on a carpeted or scratch-free work surface, such as the cardboard, as this will avoid damaging any parts during assembly. (4) Do not fully tighten all bolts until all parts are in place.
