Owner Manual

14
15
Method of usage
5.Head cushions and backrest pad's dismounting and use manual
·The head cushion allows you to contr ol the intensity of the neck and shoulder
massage, You can decide whether to use the head cushion (Recommend to use).
The backrest cushion and the backrest is connected by zipper (1), head cushion
and the backrest cushion connected by the Velcro as show in the illustration (2).
Zipper
Thread gluing
Method of usage
1 2
3 4
·Then turn the legs fixing cover over the round tube on both sides of the legs
(figure 3)
·Then use 2pcs M4 screws fix the legs on the massage chair, turn up and down to
check if there are any problems, the wires and air hose get stuck or not, finish the
installation. (figure 4)
6.Floor Protection
·The prolonged heavy pressure on the massage chair may cause scratches on the
floor. Thus, put a carpet or cushion on the floor where the massage chair is placed
to avoid this damage.
Note: Do not move the massage chair with its wheels on the rough ground or in a
narrow space. At least two persons are required to lift it. During lifting, take the
legrest sealing plate and backrest cover grooves as the acting points. (Do not lift the
armrest directly.)
7.Instruction for Movement
Warning : The rear moving wheels of the massage chair are only suitable for short-
distance and slow movement. For long-distance transportation, please use other
auxiliary moving tools to move this massage chair!
·Make sure that all the wires are pulled away from the massage chair surface;
then press the backrest down to a certain angle (with the center of gravity resting
on the wheels), you can push the massage chair forward with hands, move it to a
suitable position and gently restore it to the normal angle. (Note: During
movement, you must turn off the power button first and then unplug the power
cord and the remote controller connection wire.)