Owner Manual

12 13
Method of usage Method of usage
·Air pressure massage
·Foot roller manual massage function
·Pause/start massage button
·Backrest and calf position adjust
·Other manual functions
20 min
Function Button
Description
Display
Air
pressure
mode
Intensity
Full air pressure: air pressure massage on arm,
leg and foot.
Arm: Air pressure massage focus on arm.
Legs: Air pressure massage focus on leg and foot.
3 levels adjustable
Function Button
Description
Display
Foot roller
The foot roller massage function turn on or off.
Function Button
Description
Display
Pause/
Start
Press this button during the massage, all massage
actions are stop immediately (the timer will
continue to count down), and press this button
again, all the massage will be resume.
Function Button
Description
Lifting
button
Lying
button
Automatic
lying mode
Press and hold this button, it will raise the backrest and lower
the footrest simultaneously, a "Di.Di sound indicate that it has
reach the maximum position and stop. Press this button again
while lifting, then immediately stop.
Press and hold this button, it will lower the backrest and raise
the footrest simultaneously, a "Di.Di sound indicate that it has
reach the maximum position and stop. Press this button again
while lifting, then immediately stop.
Function Button
Description
Display
Timing
Timing
Timing adjustment, press one time, add 5
minutes, not more than 30 minutes. If it
exceeds 30 minutes, it will return to 5 minutes.
·Heating
Function Button
Description
Display
Heating
Heating
Press this button to turn on/off the back infrared
heating, and it will be warm after turning on 3
minutes.
Switch to an auto lying mode when you press key each time,
total 3 modes, cycle switching change. Long press the zero
gravity button of remote controller for 3 seconds to turn on or
off voice control function.
FUSE:
T5AL 250V
POWER INPUT
CONTROLLER JACK
ON/ OFF
3.Turn off the power and stop massage.
·When pressing the power button during the massage, it will stop all the massage
functions immediately, the backrest and footrest will go back to the default posit
on.And when the massage time up, the massage hand will go back to the default
position, all the massage function will stop, the backrest and footrest will not go
back to the default position.
·Cut off the power of the whole machine. Figure (switch power off)
Diagram of the power switch position
Unplug the power cord
4.The calf installation.
·After connecting the wires and the air hose between the chair seat and the leg
rest , unfasten the fixed pipe belt and insert the connecting part into the seat
frame(figure 1).
·Place the round tube from calf left and right sides to the legs brackets.(figure 2)
1 2