Owner Manual

PARTS
2 PCS
SHORT TABLE FRAME
A
2 PCS
LONG TABLE FRAME
B
1 PC
GLASS TABLETOP
C
| 3
HARDWARE
M6 X 45mm
SCREW
4
24 PCS
Please retain these instructions for future reference.
TOOLS REQUIRED
• Please do not exceed the weight limitations of this item.
• Do not stand on or use any part of this item as a step ladder.
• Firmly secure all bolts, screws and knobs before use.
• Reconfirm that all bolts, screws, and knobs are secure every 90 days.
• Fasten screws loosely during initial assembly. Do not firmly tighten the screws until the item is
completely assembled.
• Do not use or store this item in the proximity of open flame or flammable/combustible chemicals.
• Be aware that some parts are heavy and have sharp edges.
• Do not use this item in a way inconsistent with the manufacturer’s instructions as this could void the
product warranty.
NOTICE
UP TO 45 MIN.
ASSEMBLY
1 PERSON
ASSEMBLY
80 LBS
TABLE
CAPACITY
LBS
250 LBS
CHAIR
CAPACITY
LBS
ALLEN WRENCH
(PROVIDED)
SUCTION CUP
2
6 PCS
3
16 PCS
M6 X 15MM
SCREW
1
12 PCS
M6 X 40MM
SCREW