Owner Manual

9
• If your pump fails to run
• Check the circuit breaker or try a different
outlet to make sure the pump is receiving
electrical power.
• Check the pump discharge and tubing for
any kinks and/or obstructions
• Any buildup obstructing the water flow can
be flushed with a garden hose
• Check the rotor by removing the front
cover & plate to access the impeller area.
Turn the rotor and make sure that the rotor
is not jammed or broken
• If your pump “spews”
• Check the water level to make sure the
pump is completely submerged and there
is enough water in the basin to operate
your fountain. Not having enough water
will cause your pump to spew
• If your pump is making abnormal loud noises
• Disconnect the pump from the electrical
power supply and remove the front cover &
plate
• Carefully grip the impeller and gently pull
the impeller/rotor assembly out of the
pump housing
• Rinse the impeller/rotor assembly and
clean the cavity with clean water. If
breakage or damage is found, contact your
local retailer for parts.
TROUBLESHOOTING