Owner’s Manual Calm Infinity Fountain with LED Lights
CONTENTS Contents ....................................................... 1 What’s Included ............................................ 2 Features ....................................................... 3 Assembling & Using Your Product ............... 4 Replacement Parts ....................................... 8 Troubleshooting ............................................ 9 Caution ....................................................... 10 Warranty .....................................................
WHAT’S INCLUDED Fountain (6 LED Lights Pre-installed) 1x Back Door 1x 2 Pump 1x
FEATURES • • Flowing water adds a soothing sound to any environment • Made of lightweight, durable polyresin materials Modern, geometric design with stone-like texture SPECIFICATIONS Power Requirements ...... Standard Household 120V Water Capacity ................. 3.5 US Gallons / 13 Liters Tubing Diameter ......................... 0.5in / 1.25 cm I.D.
ASSEMBLING & USING YOUR PRODUCT Unpack all components carefully. Please check to ensure all parts have been removed from the packaging. 1. Place the Fountain on a smooth & level surface. Allow enough space to access the pump. 2. Remove the Pump from its packaging and set the water flow to its lowest setting to avoid splashing until the fountain is completely assembled. Alpine Quick Tip #1 Turn adjuster left to increase the water flow. Turn to the right to decrease flow.
3. Pull out the tubing from the back opening of the Fountain, and attach it to the Pump. NOTE: Tubing may be zip-tied to the LED cords. Cut zip-ties carefully to separate. 4. Take the LED cord out of the back opening of the fountain and attach it to the connector on the pump. Twist the protective sheath to secure the connection. Place the Pump into the fountain at the bottom of the basin.
5. Gently pour water into the fountain basin, being careful not to overflow and cause splashing. Make sure the water completely submerges the pump and the water runs clear during operation. NOTE: We recommend that you use distilled water to prevent scale build-up. The first time you operate the pump it can take up to 5 minutes for the air to be completely expelled and water begins to flow properly 6. Plug the pump power cord into your local power supply.
7. You can now adjust the water pump to your flow preference. (see Quick Tip #1) Once set, install the Back Door Cover by sliding it into the designated opening. Quick Tip #2 Make sure the power cord is tucked neatly into the cord slot. 8. If splashing occurs, you may need to adjust the flow of each individual water valve. Turn a valve left or right to increase or decrease the water flow for a specific spout. See below for which valve corresponds to which spout.
. Congratulations, your fountain is now complete. Don’t forget to add water regularly as water will evaporate over time. REPLACEMENT PART •Replacement Pump .................................. ALSO AVAILABLE FROM ALPINE •Fountain Care Formula .............................. Foam and scale remover for indoor and outdoor fountains. •Touch Up Paint Kit .................................... Includes primer, thinner, 7 paint colors, applicator and sealer.
TROUBLESHOOTING • If your pump fails to run • Check the circuit breaker or try a different outlet to make sure the pump is receiving electrical power. • Check the pump discharge and tubing for any kinks and/or obstructions • Any buildup obstructing the water flow can be flushed with a garden hose • Check the rotor by removing the front cover & plate to access the impeller area.
CAUTION • Always unplug the pump from the electrical outlet before cleaning & handling • Use with clean water only, do not place the fountain and/or parts in any other liquid. • Periodically change water & clean the pump to keep free from microorganisms • Disconnect and store the unit in a dry place if not in use for an extended period of time, or during freezing weather. • Do not operate the fountain in temperatures below 41° F / 5° C. • Do not operate with water above 90°F / 30°C.
LIMITED WARRANTY INFORMATION Thank you for choosing this product! We aim to please with our wide range of products including Fountains, Birdbaths, Statuary, Pond Supplies & More. All of our products are constructed from the highest quality materials. In the event that we have not achieved our usual standard of excellence, we will repair or replace, at our discretion, within the warranty period. A valid proof of purchase, with the purchase date clearly indicated, must be provided.
