Installation & Assembly

S
O F A B E D A S S E M B L Y / O P E N I N G A N D C L O S I N G I N S T R U C T I O N S
Packed inside your sofabed are four legs. These
are zip-tied to the bottom of the frame – you should see
them when you flip the sofabed on its back.
On each corner of the sofabed bottom, you will see 4 screw holes. Screw the legs into these holes thereafter
set the sofbed on the floor ensuring that the sofabed is level – you can compensate for uneven floors by
screwing the legs to the desired height so that the sofabed does not wobble
With the sofabed stable on the floor, lift the arm so that the arm keyways align to the body keyways.
Slide in the arm onto the keyway. Do this for both arms. The sofabed is not full assembled.
Attach the pull strap to the back of the sofabed. Pull on the pull strap to convert the sofa into a sofabed using
the other arm to assist in the opening. To convert the sofabed into a sofa, grab the frame from the foot part,
lift and push the frame into the body of the sofabed.