Installation & Assembly
07
UNIT INSTALLATION STEPS
• • •
Step 1. Begin assembly with the partition that is going up against the wall. Lean
partition up against the wall with nished edge facing you.
Step 2. Place the additional partitions that make up the rest of the unit against the
wall with holes facing you.
Step 3. After all your partitions are set in place, go back to the beginning partition
with a xed shelf, and lock your Rax cups into the top Rax bolts with a screwdriver
to hold in place.
Step 4. Once you have secured one side of your xed shelf, you will carefully turn
your second partition inward to attach the other side of the xed shelf and lock into
place.
Step 5. You will repeat steps 1-4 with each additional partition and other units until
you have all your partitions in place.