Installation & Assembly
With the help of your adult partner, place the Sofa on a level surface to check for
wobbles.
If it wobbles, lift the Sofa some 30cm to 50cm high from the ground.
Keep your feet and toes well away from the drop zone.
Drop the Sofa freely and vertically with all four legs, hitting the ground, all at the
same time.
This Drop Test will help to ensure that all the Bolts and gaps reach full alignment
status.
Test again for evenness on a level surface.
If no wobbles are found, slowly and steadily, place the Sofa facedown.
Then, proceed to tighten all Bolts at all joints in a sequential manner.
When tightening the Bolts, tighten sequentially.
DO NOT tighten any Bolt fully and then move on towards the next one.
This could cause the frame to warp. If there are still wobbles, loosen the
Bolts and execute the same drop test.
If the Sofa is not stable, it could lead to damage to the product.
Step 4
6 OF 8