Assembly Instructions

Step 18

P.22

Place sticker (D) as per diagram.

Insert the assembled drawer into the unit frame, extend the Ball Bearing Slide Tracks (V)

on the pedestal Side Panel all the way forward .Then align the Slide Runners on the assembled

drawers with the Slide Tracks and push the drawer carefully inside until it stops. Note : if the

drawer does not go in smoothly, please take it out and repeat the step. If you need to remove the

drawer, please pull the drawer all the way out,press or lift the plastic release lever and pull out the

drawer and then re-assembled the drawer until it was going in smoothly .