Installation & Assembly

Outdoor Polywood Table

Assembly Instructions

Base

Wrench

Screw Washer

1.Loose Part E&Part F from Part C.

2.Fix Part C to the Part A using Screw E&Washer F

as shown in diagram.

1pc

Leg

Bar

1pc

Table Top

2pc

1pc

2pc

ASSEMBLY INSTRUCTIONS

Prior to assembly, make sure you lay out and identify all the parts listed

below in the parts list.

Tighten all bolts securely. All bolts should be hand tightened

before use.

Never use power tools or excessive force during assembly and tightening

of bolts.

Warning:

. Make sure the Table is located on a solid, level surface.

Part List

PAGE 1
Outdoor Polywood Table Assembly Instructions ASSEMBLY INSTRUCTIONS Prior to assembly, make sure you lay out and identify all the parts listed below in the parts list. Part List A Tighten all bolts securely. All bolts should be hand tightened before use. Never use power tools or excessive force during assembly and tightening of bolts. 1pc Warning: Table Top 1. Make sure the Table is located on a solid, level surface. B 1pc Leg 1 C 1pc .Loose Part E&Part F from Part C.
PAGE 2
3 . Put Part B on the Part A to cover Part C as shown in diagram. 4 . Put Part D on the Part B . Then fix Part D using Screw E& Wansher Fas shown in diagram. D E F B B 5 . In the end,check to make sure all srews are fixed tightly before use.