CHECK BEFORE STARTING Are you missing anything? Double-check all parts, hardware and accessories sifted on Page 6 are accounted for, Check out our Quick Tips! We recommend reviewing the per-assembly handouts. Even experts need a refresher now and then! Prep Time! Please review the assembly instructions and aff diagrams prior to assembling. Arrange parts as recommended on Page 7 and group identical hardware together to make assembling easier.
PRE ASSEMBLY INTRODUCTION ‘We understand building ready-oi-assembie furniture can be a challenging experience for some. To help avoid confusion, we have provided some helpful tips that may speed up the process. Teamwork ALWAYS have at least two people to help with transporting and assembling the product to avoid potential injury and/or damage. Suitable Location Assembling near the area of the intended location is highly recommended.
ASSEMBLY AND CARE ADVICE FAILURE TO FOLLOW THE GUIDELINES BELOW MAY RESULT IN INJURY AND/OR PROPERTY DAMAGE. Turn clockwise to tighten and only tighten when step is completed or when instructed io do so. Position each part correctly and Insert screws or bolls into their respective holes. Use the appropriate hand {loos or power tools for assembly. Select steps, such as lightening screws and/or bolts, may require hand fools to avoid causing damage during assembly.
ASSEMBLY INSTRUCTIONS Align Plastic feet (#11) to the headboard then secure by using screws 1 Part @) xiii Part @T) apexes Hardware) apexes Align side rails (#3) to the arms then secure by using bolts ($A) with 2 Part ® apexes Hardware) apexes Hardware) apexes Hardware{g) PCs
ASSEMBLY INSTRUCTIONS Align and attach support rail (#9) to ams Part @ xiii 4 Align back panel (#2) to the arms then secure by using bolts (#8) with washers Part @ pe Hardware @D xtpcs Hardware @D ipecacs Hardware) pcs
ASSEMBLY INSTRUCTIONS 5 Align slats (#7) to the side rails then secure by using screws Part@ tsetse Hardware scopes 6 Align side panels (#6) to the front and back panel Secure by using bolts Part @ ripe (#C) with washers Part @ «pc Part @ apexes Hardware) capes Hardware) epees Hardware) SPCA 106112
ASSEMBLY INSTRUCTIONS Attach support rail (#10) to the side panels #6). Part) x1pc Align slats (#8) fo the side panels {#4 5}, then secure by using screws Part@ exist HG).
