Installation & Assembly

Step 1: Disconnect the power by turn it off at the circuit breaker

panel.

Step 2: Install suitable screw & anchors (B) to the ceiling (not

included).

Step 3: Make appropriate electrical connections using wire nuts.

Make the wiring connections with the local electrical code.

Step 4: Place connections into ceiling.

Step 5: Attach part (A) including canopy, hanger and lamp to the

ceiling and secure by screws of anchors.

Step 6: Adjust the hanger length as desired. (See picture

description)

Step 7: Restore power at the circuit breaker panel.

INSTRUCTIONS PRODUCT CODE: KOMOD - 2W

Hanger adjustment instructions:

To shorten the hanger: Just push the hanger up,

hanger will be locked automatically.

To lengthen the hanger: Lift up on the hanger and

push up on the lock. While keeping the lock

depressed, lower the hanger to the desired length.

Release the lock to set.

Push

the hanger