Owner Manual

Step 3
Step 4
Place the Chair upright to insert the Support(E), the Front Stretcher(C) and the Rear Stretcher(D) as shown.
Attach the Front Stretcher(C) to the Right Chair Leg(B) with Bolts(①) and Spring Washers(④), using the
Allen Key(⑤) as shown above.
Note: You may need to apply a little pressure to the Chair Leg in order for the Support(E), the Front
Stretcher(C) and the Rear Stretcher to be slotted into position.
Please ensure that the drill holes of the Support(E) are towards the ground.
Repeat the same process to the Left Chair Leg(A).
Place the Chair on a table as shown.
Insert the Screws(③)with a Screwdriver(⑥) to tighten the Support(E) and the Rear Stretcher(D).
Page 5 OF 7