Owner Manual

Step 1
A. LEFT CHAIR LEG
C. FRONT STRETCHER
E. SUPPORT
G. SEAT CUSHION
Step 2
B. RIGHT CHAIR LEG
D. REAR STRETCHER
F. BACK CUSHION
7. Plastic Plug
Place the Left Chair Leg(A), Right Chair Leg(B), Front Stretcher(C), Rear Stretcher(D), Support(E),
Back Cushion(F), Seat Cushion(G) and the Plastic Plugs⑦ onto a clean, non-marring surface.
Place the Back Cushion(F) in between the Left Chair Leg(A) and the Right Chair Leg(B) as shown in picture.
Attach the Right Chair Leg(B) to the Back Cushion(F) with Bolts(①) and Spring Washers(④), using the
Allen Key(⑤) as shown above.
Repeat the same process to attach the Left Chair Leg(A).
Note: Do not fully tighten the Bolts at this time.
Page 4 OF 7