Installation & Assembly

1
2
3
X
Y
X
Y
Step 3
Place the wall brackets on the finished
wall and install at the locations drilled
with the screws as shown here.
According to measures taken on step 2,
make drills with diameter 0,3in. For each
wall plate must be made 4 holes. Then
insert nylon rawlplug for each drill.
Fix wall plate to wall using screws. After
that plates are strongly fixed on wall, you
can install vanity on wall.
Step 2
Determine the ideal location of your new vanity.
Mark the holes and drill pilot holes in the dry wall.
Step 1
Pull out completely the drawers and take off from
the slide rails.