Assembly Instructions

Read this instruction carefully. See hardware and furniture part list for guidance.

Be sure all parts are complete, before you assemble. Place all wooden furniture

parts on a clean and flat soft surface to prevent from being scratched.

Follow the figure to start assembling.

CAUTIONS : 1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.

2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.

3. Keep all hardware parts out of reach of children.

NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.

PART LIST

ITEM DESCRIPTION

QTY

HEADBOARD 1 PC

FOOTBOARD 1 PC

SIDE RAIL 2 PCS

CENTER RAIL 1 PC

CENTER SUPPORT LEG 3 PCS

CENTER SUPPORT 2 PCS

BED SLAT 24 PCS

BED LEG 4 PCS

STEP 2

STEP 1

HARDWARE LIST

ITEM DESCRIPTION

QTY

JCBB BOLT M8 x 30mm 8 PCS

WOOD SCREW M4 x 38mm 8 PCS

M5 ALLEN KEY (BALL SHAPE)

1 PC

PVC BLACK WASHER 4 PCS

WOOD SCREW M3.5 x 16mm 8 PCS

BED SLAT SIDE FITTER 24 PCS

BED SLAT CENTRE FITTER 12 PCS

ASSEMBLY INSTRUCTIONS

Loosely fit bolt (1) into Headboard (A)

& Footboard (B) as picture shown.

STEP A

STEP B

Tool needed : Screwdriver (not provider).

FULL BED

PAGE 1
ASSEMBLY INSTRUCTIONS FULL BED Read this instruction carefully. See hardware and furniture part list for guidance. Be sure all parts are complete, before you assemble. Place all wooden furniture parts on a clean and flat soft surface to prevent from being scratched. Follow the figure to start assembling. CAUTIONS : 1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed. 2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread. 3.
PAGE 2
ASSEMBLY INSTRUCTIONS STEP 3 2 of 2 STEP 4 1 C A A D 3 C F 5 STEP 5 STEP 6 Palm 6 7 6 G G Palm STEP A F 7 G STEP B * When moving the bed position, the center support legs must be adjust to be straight to avoid any broken problem.