Assembly Instructions

Place the Seat Cushion(F) and Back Cushion(G) on the Swivel Chair.

Your Swivel Chair is ready for use.

This Swivel Chair can only be used on a flat, level surface.

Step 5

Step 6

With the help of your adult partner, lay the Chair down on a clean, non-marring surface.

Place the Swivel Plate(E) between the inner bottom bars of the Left Armrest(B) and Right Armrest(A).

Attach the Swivel Plate(E) to Left Armrest(B) and Right Armrest(A) using Bolts(①), and Washers(②) with Allen Key(③).

Please attach the Swivel Plate(E) to the Armrest on the floor first. Then, with the help of your adult partner, turn the

Chair over onto the other Armrest and assemble the Swivel Plate(E).

Tighten all Bolts fully in a sequential manner.

With the help of your adult partner, stand the Swivel Chair up.

Adjust the Pre-attached Levellers on the Swivel Plate(E) until the Chair is level with the ground.

Adjust height for balance

Adjust low for balance

Page 5 OF 6