Assembly Instructions

Step 1
Step 2
Place the Seat(C) between the Right Armrest(A) and Backrest(D).
Attach Seat(D) to Right Armrest(B) using Bolts(①), and Washers(②) with Allen Key(③) as shown above.
Do not fully tighten the Bolts.
Open the carton and place all the parts onto a clean, non-marring surface.
Place the Right Armrest(A) with its inside facing skywards.
Align the Backrest(D) with Right Armrest(A), by inserting the Dowel on the Backrest(D) into the mounting position of the Right
Armrest(B) as shown above.
Attach Backrest(D) to Right Armrest(A) using Bolts(①), and Washers(②) with Allen Key(③).
Do not fully tighten the Bolts.
Note: Occationally some of the PE wicker will cover the Bolt points, preventing easy
assembly, the PE wicker should not be cut but moved away from the mounting positions.
Dowel
Page 3 OF 6