Installation & Assembly

STEP 1 STEP 2
STEP 3 STEP 4
ASSEMBLY INSTRUCTIONS
PAGE: /5
2
- Insert hardware A2 onto panel (1).
(Repeat 4 times.)
- Hit hardware
I onto panel (1).
(Repeat 1 times.)
SCREWDRIVER
REQUIRED
* Ensure the arrows on hardware A1 point towards mounting positions.
- Insert hardware A1 onto panel (3), (4) and (5).
(Repeat 8 times.)
- Insert hardware
A2 onto panel (3) and (4).
(Repeat 4 times.)
- Insert hardware
B onto panel (3), (4) and (5).
(Repeat 12 times.)
SCREWDRIVER
REQUIRED
* Ensure the arrows on hardware A1 point towards mounting positions.
HAMMER
REQUIRED
HIT
x1
I
A2
x4
ROTATE
1
A2
x4
ROTATE
x12
PRESS
B
PRESS
A1
x8
3
4
5
- Attach panel (3) and (4) to panel (5).
- Insert all hardware A2 into A1.
- Rotate all A1 until tight.
- Apply A3 onto all A1.
(Repeat 4 times.)
OR
HARDWARE
D
SCREWDRIVER
REQUIRED
* In this step hardware A1, A2 and B are pre-inserted.
- Attach panel (1) to panel (3) and (4).
- Insert all hardware A2 into A1.
- Rotate all A1 until tight.
- Apply A3 onto all A1.
(Repeat 4 times.)
OR
HARDWARE
D
SCREWDRIVER
REQUIRED
* In this step hardware A1, A2 and B are pre-inserted.
ROTATE
Section View
x4
A2
A1
x4
PRESS
A3
3
4
5
ROTATE
Section View
x4
A2
A1
x4
PRESS
A3
1
3
4
5