3 Assemble the Tube G with the Structure A. Fix the Structure B to the already assembled part using Screws (4) and a set of Screw (3) and Washer (7). 5 Ensamble el Tubo (G) a la Estructura A. Ensamble la Estructura B con la parte del mueble que tiene armada hasta ahora y fijelas con Tornillos (4) y Tornillo (3) que lleva una Arandela (7). 1. 80mm 3 4 1x 1. 25mm 2x H G 4 H 4 G H H 3 G 4 A G 4 4 Insert the Tubes (H) on the Holes of the Structure A and fix them with Screws (4).
7 4 Use Screws (4) and Nuts (9) to Fix the sliders (E and F) to the Tubes (H). Note that the sliders , should slide out to the front of the desk. Tome los deslizadores (E y F) y fijelos a los Tubos (H) , usando Tornillos (4) y Tuercas (9). Fijese que los deslizadores salgan hacia delante. 9 Place the Glass Panels D over the structures A and B and fix them with screws (5) Dont tight the screws until the glass panel fits in it's correct place.
® PRODUCT WARRANTY 6/1/2012 11:37 AM
