Installation & Assembly

1. Ensure a suitable location has been selected for your modular sectional before assembly.

2. Wooden legs and U Clips are located inside the zippered compartment in the black dust cover under the modular

frame.

3. Attach the wooden legs to the corresponding pre-drilled holes by hand turning clockwise until tight. (see Figure 1)

4. If required, plastic U clips are included for connecting pieces together to prevent movement. The U Clips are

installed into base and hold pieces in place (see Figure 2)

5. First, connect U Clips to RAF sectional. Second, connect U Clips to LAF sectional. Last, use block to raise the corner

and sectional pieces (see Figure 3), then you can use U Clips to connect the corner with sectional pieces by hand.

6. Use a wood block the size of 10 x 3 x 2. Do not use wood block larger than size recommended.

7. The ottoman does not include U Clips to enable it to be easily repositioned.

8. Your modular sectional is now ready for use!

Figure 1

Figure 2

PAGE 1
. Ensure a suitable location has been selected for your modular sectional before assembly. 2. Wooden legs and U Clips are located inside the zippered compartment in the black dust cover under the modular frame. 3. Attach the wooden legs to the corresponding pre-drilled holes by hand turning clockwise until tight. (see Figure 1) 4. If required, plastic U clips are included for connecting pieces together to prevent movement. The U Clips are installed into base and hold pieces in place (see Figure 2) 5.
PAGE 2