Owner’s Manual

ASSEMBLY

4. Attach two propane tank straps (FF) to the

bottom plate (G) in two cross corners as shown.

5. Rotate the door knob to unlock; open the door

on the door panel (H). Place the bottom plate (G)

into the front of the panel assembly as shown.

Secure the bottom plate (G) to the panels by using

four M6 x 30 bolts (CC). Tighten with wrench (II).

6. Remove the preassembled screws and washers

from the corners of the burner assembly (B). Place

the burner assembly (B) into the top of the table

top (D). Align the holes in the burner assembly

corners (B) with the holes in the top of the table

top (D) and replace the four screws and washers

removed at the beginning of this step. Be sure to

tighten completely.