Installation & Assembly

Minifix Shaft
42 pieces
Minifix Head
42 pieces
Kavelye /
Dowel
42 pieces
Shelf Pim
-Crystal-
28 pieces
Grey Square
Stand
13 pieces
4*35
Chipboard
Screw
14 piece
Half Camel
Hinge
1 piece
Half Camel
Brake Hinge
1 piece
Butt Hinge
6 pieces
Butt Brake
Hinge
4 pieces
3,5*18
Chipboard
Screw
74 pieces
Tuna Handle
160mm
5 pieces
Handle Screw
22mm
10 pieces
BOOKCASE 201*40*161 DISASSEMBLED ACCESSORIES AND ASSEMBLY CHART
The minifix shaft is pinned to plastic plugs in all trays. The dowel is hammered into the empty holes located
near the pinned holes. Bingo minis are pinned to m6 nuts where the products will touch the floor.
Bottom trays are reversed and the stands, included in
the package, are fixed to the narrow cabinets as 4
pieces and to the large cabinet in the middle as 5
pieces by using 3.5 * 18 screws.
The stable baffle located on the mid-part of the high
cabinet are precisely placed on the minifix heads
located on the sides and tightened with the help of a
screwdriver.
The side trays and pillars are placed on the bottom
tray and the minifixes are tightened with the help of
a screwdriver.
NOTE: The number of accessories may change when the product dimensions change.
The 8mm backboard is placed in the channels located
on the side tray and bottom tray.