Assembly & Installation Instrutions

A: 4-1/4"
B: 4"
C: 13-1/2"
A
B
C
3. Attach the back plate to the mounting plate, secure the headless screws from the bottom hole of the back plate onto
the the bottom side of the mounting plate.
4. Install bulb (not included). See relamping label at socket area or packaging for maximum allowed wattage.
5. Press the socket spring, place the interior glass shade into the glass bracket, adjust the slot of the interior glass
shade to locate into the arm of the fixture, then place the exterior glass shade into the glass bracket, adjust the
exterior glass shade to locate into the slot of the fixture. (See Fig. 1)
Page 2
The following parts are available for re-order if damaged or missing.
Turn on the power at the main fuse or circuit breaker box.
Mounting Screw (B)
Green Grounding
Screw (C)
“ L ” Screwdriver (F)
Wire Connector (E)
Mounting Plate (A)
Headless Screw (D)
Assembly Kit
Exterior Glass Shade (G)
(1 PC)
Interior Glass Shade (H)
(1 PC)