Assembly Instructions

ASSEMBLY INSTRUCTIONS

LOOP AUT

CANOPY

NIPPLE

HEX NUT

CIRCULAR STRAP

WIRE CONNECTOR

POWER SUPPLY WIRE

GROUND GREEN SCREW

MOUNTING SCREW

TOP LOOP

CHAIN

OUTLET BOX

GROUND WIRE

FIXTURE LOOP

CHAIN LINK

LED MODULE

STEEL PANEL

DECORATIVE KNOB(1)

GLASS(2)

SCREW(4)

SCREW(3)

READ & SAVE

INSTALLATION & OPERATION INSTRUCTIONS

TOOLS & MATERIALS REQUIRED

CAUTION

Prior to assembly, refer to ELECTRICAL CONNECTIONS section. If you do not have electrical

wiring experience, refer to a do-it-yourself wiring handbook or have your fixture installed by a

qualified licensed electrician.

GENERAL

1. Be sure to read these instructions and review the diagrams thoroughly before beginning.

2. Electrical connections must be in accordance with local codes, ordinances, or the National

Screwdriver Wire Cutters

Adjustable Wrench Wiring Supplies

PAGE 1
ASSEMBLY INSTRUCTIONS OUTLET BOX HEX NUT CIRCULAR STRAP POWER SUPPLY WIRE WIRE CONNECTOR GROUND WIRE MOUNTING SCREW NIPPLE CANOPY LOOP AUT GROUND GREEN SCREW TOP LOOP CHAIN CHAIN LINK FIXTURE LOOP SCREW(3) SCREW(4) LED MODULE GLASS(2) STEEL PANEL DECORATIVE KNOB(1) READ & SAVE INSTALLATION & OPERATION INSTRUCTIONS TOOLS & MATERIALS REQUIRED Screwdriver Wire Cutters Adjustable Wrench Wiring Supplies CAUTION Prior to assembly, refer to ELECTRICAL CONNECTIONS section.
PAGE 2
Electric Code. If you are unfamiliar with methods of installing electrical wiring, secure the services of a qualified licensed electrician. 3. Before starting the installation, disconnect the power by turning off the circuit breaker or by removing appropriate fuse at fuse box. Turning the power off at the light switch is not sufficient to prevent electrical shock. PREPARE THE FIXTURE NOTE: First turn off electricity 1. Thread nipple into loop until snug.