Assembly Instruction

ASSEMBLY INSTRUCTIONS

WHITE SUPPLY WIRE

CIRCULAR STRAP

DECORATIVE KNOB

SCREW

OUTLET BOX

BLACK SUPPLY WIRE

WIRE CONNECTOR

GROUND WIRE

GROUND GREEN SCREW

LED MODULE

STEEL PANEL

GLASS(2)

SCREW(3)

DECORATIVE KNOB(1)

SCREW(4)

READ & SAVE

INSTALLATION & OPERATION INSTRUCTIONS

TOOLS & MATERIALS REQUIRED

Screwdriver Wire Cutters

Adjustable Wrench Wiring Supplies

CAUTION

Prior to assembly, refer to ELECTRICAL CONNECTIONS section. If you do not have

electrical wiring experience, refer to a do-it-yourself wiring handbook or have your

fixture installed by a qualified licensed electrician.

GENERAL

1. Be sure to read these instructions and review the diagrams thoroughly before

beginning.

2. Electrical connections must be in accordance with local codes, ordinances, or the

National Electric Code. If you are unfamiliar with methods of installing electrical wiring,

secure the services of a qualified licensed electrician.

PAGE 1
ASSEMBLY INSTRUCTIONS GROUND GREEN SCREW OUTLET BOX WIRE CONNECTOR BLACK SUPPLY WIRE GROUND WIRE WHITE SUPPLY WIRE SCREW CIRCULAR STRAP DECORATIVE KNOB SCREW(3) SCREW(4) LED MODULE GLASS(2) STEEL PANEL DECORATIVE KNOB(1) READ & SAVE INSTALLATION & OPERATION INSTRUCTIONS TOOLS & MATERIALS REQUIRED Screwdriver Wire Cutters Adjustable Wrench Wiring Supplies CAUTION Prior to assembly, refer to ELECTRICAL CONNECTIONS section.
PAGE 2
3. Before starting the installation, disconnect the power by turning off the circuit breaker or by removing appropriate fuse at fuse box. Turning the power off at the light switch is not sufficient to prevent electrical shock. PREPARE THE FIXTURE NOTE: First turn off electricity Detach the circular strap from the backplate and mount the circular strap to the outlet box in your wall using the two screws provided.