Assembly Instruction

ASSEMBLY INSTRUCTION

NOTE: Please consult a qualified electrician if you are not certain of installation or servicing.

CAUTION: Before starting installation or servicing, disconnect power by turning off the circuit breaker or by

removing the fuse at the fuse box.

1. Carefully unpack the fixture, lay out all parts on a clean surface.

2. Insert Plastic Plugs into the wall, and fasten the Strap to the wall by threading Self-threading Screws into

Plastic Plugs.

3. Place Glass Panel A and Glass Panel B to the Fixture Frame in turn.

4. Connect wires white to white and black to black. Cover connections with provided Wire Connectors. Tie

ground wires from wall and from fixture to the Ground Screw on the Strap.

5. Place the fixture body to the wall, aligning the mounting strap protrusions with the corresponding mounting

holes on the fixture wall plate. Use the provided screws to secure the fixture wall plate to the mounting strap,

ensuring that the fixture body is held firmly against the wall.

6. Turn on power.

PAGE 1
ASSEMBLY INSTRUCTION NOTE: Please consult a qualified electrician if you are not certain of installation or servicing. CAUTION: Before starting installation or servicing, disconnect power by turning off the circuit breaker or by removing the fuse at the fuse box. 1. Carefully unpack the fixture, lay out all parts on a clean surface. 2. Insert Plastic Plugs into the wall, and fasten the Strap to the wall by threading Self-threading Screws into Plastic Plugs. 3.
PAGE 2
INSTRUCCIÓN DE ASAMBLEA NOTE: Por favor, Consulte con un electricista cafificado en caso de que esté seguro de la instalación. CAUCIÓN: Antes de comenzar la instalación, cortar la electricidad mediante apagar el cortacircuitos o quitar el fusible desde la caja de fusible. 1. Desempaquetar cuidadosamente la instalación, disponer todas las piezas sobre una superficie límpia. 2. Inserte los Enchufes Plásticos en la pared, y ajuste la Cinta a la pared enhebrando los tornillos dentro de los Enchufes Plásticos.