Assembly Instructions

I. Align the two front legs (#3)
with the pre-drilled holes of
the seat (#2).
II. Prepare 4 bolt assemblies by
inserting FIRST the lock
washer (#D) onto the bolt
(#C) and then the flat washer
(#E) onto the SAME bolt (#C),
in that order.
III. Insert the bolt assemblies
through the pre-drilled holes
in the corners of the seat (#2)
and secure those bolts using
the Allen wrench (#F) to lock
them with the front legs (#3).
Turn right (clockwise) to tighten
Page 5 of 5
#C x 4 pcs
#D x 4 pcs
#E x 4 pcs
Carefully place the completed chair in upright
position. Make sure the chair is rested on a
flat surface and does not feel loose or wobbly.
If it does, double check that the bolts/screws
are secured and properly tightened.
ASSEMBLE EVERYTHING EXACTLY THE SAME FOR THE SECOND CHAIR