Assembly Instructions

I. Place the backrest with legs

(#1) on a protected surface.

Insert the wood dowel (#G) into

the center hole of the backrest

with legs (#1).

II. Align the seat (#2) with the

wood dowel (#G) and the pre-

drilled holes of the backrest with

legs (#1).

III. Prepare a bolt assembly by

inserting FIRST the lock washer

(#D) onto the bolt (#B) and then

the flat washer (#E) onto the

SAME bolt (#B), in that order.

IV. Insert the bolt assembly through

the seat (#2) and secure those

bolts using the Allen wrench

(#F) to lock them with the

backrest with legs (#1).

Turn right (clockwise) to tighten

Page 4 of 5

#B x 2 pcs

#D x 2 pcs

#E x 2 pcs

#G x 1 pc

#A x 4 pcs

#D x 4 pcs

#E x 4 pcs

I. Prepare 4 bolt assemblies by inserting FIRST the lock washer

(#D) onto the bolt (#A) and then the flat washer (#E) onto the

SAME bolt (#A), in that order.

II. Insert the bolt assemblies through the pre-drilled holes in the

corners of the seat (#2) and secure those bolts using the Allen

wrench (#F) to lock them with the backrest with legs (#1).