Page 1 of 12
Page 2 of 12
Page 3 of 12
Page 4 of 12
CAM LOCK FASTENER ASSEMBLY INSTRUCTIONS Page 5 of 12
COFFEE TABLE ASSEMBLY INSTRUCTIONS please keep for future reference PARTS LIST A 1PC B 1PC C 1PC A H G 1PC G H E D 1PC H 2PCS I 2PCS DIMENSIONS : 47.2"(W)*23.6"(D)*17.
ASSEMBLY INSTRUCTIONS STEP : 1 Hardware 1 x 8 pcs Hardware 3 x 38 pcs J 1 Dowel hole K 1 1 A 1 L 3 3 3 3 3 3 3 3 O 3 3 Page 7 of 12
ASSEMBLY INSTRUCTIONS STEP : 2 Hardware 7 x 4 pcs Hardware 12 x 4 pcs K Dowel hole N J 7 7 N 12 12 C F 12 12 Page 8 of 12
ASSEMBLY INSTRUCTIONS STEP : 3 Hardware 2 x 8 pcs Hardware 5 x 8 pcs B C D Dowel hole E G 5 5 5 5 5 5 A B 2 E Page 9 of 12
ASSEMBLY INSTRUCTIONS STEP : 4 Hardware 8 Hardware 9 Hardware 10 Hardware 11 x 8 pcs x 16 pcs x 4 pcs x 8 pcs I 9 9 8 11 8 9 11 9 H 8 I X2 8 10 X2 10 STEP : 5 Hardware 9 x 16 pcs Hardware 13 x 4 pcs I 13 13 9 H I 13 13 H Please refer to last page for hinge adjustment.
ASSEMBLY INSTRUCTIONS STEP : 6 Make sure the unit is rested on a flat surface and does not feel loose or wobbly. If it does, double check all bolts/screws are secured and properly tightened.
HINGE ADJUSTMENT Height Adjustment Two screws, located at the top and bottom of the hinge, mount the hinge to the cabinet. Turn these first to make sure the door is secure. If the door is still too high or low, loosen these screws slightly and then lift or lower the door until it is in the position you want. Firmly tighten the screws to secure the door. Remember to support the door as you loosen these screws or it could drop completely out of its initial position.
