ANTI - TIPPING KIT HARDWARE IDENTIFICATION PARTS IDENTIFICATION 1 SET A. CHEST 1. SHORT SCREW 1PC 2. LONG SCREW 1PC 3. CABLE TIE 1PC 4. 'L' BRACKET 2PCS This tip restraint must be attached to a wall stud STEP 2 Locate the other bracket on the wall over a wall stud and using long screw enclosed. STEP 1 Attach a bracket securely to the back top rail of the dresser using short screw provided, through the smaller hole. 1 two inches below the mounting bracket secured to the back of chest.
