Assembly Instructions Tools Required for Assembly ASSEMBLY RATING The Assembly Rating is a 5-point Alton Wrench oF system that shows the degree of effort (Included) needed in assembling a specific i. ! product (with 1 being easy and 5 being Phillips Screwdriver (Er difficult). For most products, two (Not Included) persons are recommended.
90-DAY LIMITED REPLACEMENT PARTS WARRANTY This item comes with a 90-day limited replacement parts warranty to the original purchase defects in materials and workmanship for a period of ninety (90) days from the date of receipt. This warranty is not transferable. If a Product covered by this warranty is determined fo be defective or missing an essential om within the warranty period.
1. PER-ASSEMBLY INTRODUCTION Unless you are particularly adept at assembling flat-antiknock-down furniture, we understand building ready-to-assemble furniture can be a frustrating experience for some. To help avoid confusion and to make the assembly process quicker and smoother, we have provided some helpful tips.
CAM LOCK FASTENER ASSEMBLY INSTRUCTIONS \ Nate: Every cam lock Holt ms tarts have a ca lock Fr = can nectar in order tn — Eastern te pants together Align the cam connector with Secure the threaded L side opening (or arrow) end of the cam bolt pointing to the small busing drilled hole. screwdriver, ~. oh @ NTA “~ Turn right (clockwise) to tighten, (3) Twa parts should fit snugly =x } insert the cam lock against each other. bolt into the preinstalled hole above the cam connector.
COFFEE TABLE ASSEMBLY INSTRUCTIONS Please keep for future reference PARTS LIST Before you begin, please read "Assembly and Care Advice”, P Reassembly Introduction” and "Cam Lock Fastener Assembly Instructions” DIMENSIONS 47.24" () X23.62° (B) XA7.72" {H) @ PCS @ PCS ®a32pcs GOOP arcs E55 0.
ASSEMBLY INSTRUCTIONS STEP Hardware #9~10pcs Please refer to last page for hinge adjustment. hole usage The darkened holes are the holes for the screws. Make sure the product is rested on a flat surface and does not feel loose or wobbly. If it does, double check that the bolts/screws are secured and properly tightened.
HINGE ADJUSTMENT Height Adjustment Two screws, located at the top and bottom of the hinge, mount the hinge to the cabinet. Turn these first to make sure the door is secure.
