Installation & Assembly

6of6
Figure 8
Socket
Bulb
STEP 7 - Install Bulb
A. This fixture uses standard bulb with a standard screw
base. Maximum 100 watts.
B. Insert bulb and screw properly into place.
Figure 9
STEP 8 Attach Diffuser to Shade-
A. Place Tabs (K) onto the edge of the Diffuser (L). Attach the
Diffuser (L) onto the bottom edge of the Shade. Align the
holes on Tabs (K) and the Mounting Hole on the Shade.
Secure them together by threading Lock Screws (J) into the
Mounting Holes. Hand tighten until snug.
Your fixture is now assembled and ready to use. Enjoy!
Diffuser
Lock
Screw
Tab
Mounting Hole
Shade
Assembly Instruction