Assembly Instructions
Parts List
Component List Leg Leg Leg Leg Corner frame Glass Corner glass
Hardware List Foot * *Note: This piece comes preassembled for shipping purposes and must be disassembled to complete the desk assembly.
Screw feet (A) into legs (1,2,3,4) and CPU stand (8). Tray arm Tray bracket Disassemble keyboard tray slider (B) by sliding the tray arm and tray bracket apart. Depress the small lever of the tray bracket and carefully pull the two pieces apart. Repeat this process for both keyboard tray sliders (B).
Attach the tray arms of keyboard tray sliders (B) to legs (1,2) using screws (C). Ensure that the open end of each tray arm is near the front of each leg. Tighten screws (C) with a screwdriver. I Attach crossbar (6) to legs (1,2) using long bolts (D) and plastic washers (E). Tighten long bolts (D) with wrench (I).
I Attach crossbar (6) to legs (3,4) using long bolts (D) and plastic washers (E). Tighten long bolts (D) with wrench (I). I Attach corner frame (5) to legs (2,3) using short bolts (F). Tighten short bolts (F) with wrench (I).
I Attach glass (9) to the desk frame using medium bolts (G). Tighten medium bolts (G) with wrench (I). I Attach middle glass (10) to the desk frame using medium bolts (G). Tighten medium bolts (G) with wrench (I).
Attach the tray brackets of keyboard tray sliders (B) to keyboard tray frame (7) using screws (C). Ensure that the open end of each tray bracket is near the back of keyboard tray frame (7). Tighten screws (C) with a screwdriver. Insert rubber suction cups (H) into keyboard tray frame (7). Carefully lay keyboard tray glass (11) in place and gently press to secure. Tray arm 2 Tray bracket 1 Carefully slide keyboard tray frame (7) into place.
