Assembly Instruction

Step 1
Step 2
Place the Chair Back(A) on a soft surface to avoid any scratches or
damages to the product.
REMOVE the Seat Base Cover from the Chair Seat(B), take out
the front legs and hardware accessories.
4 of 7
Put the chair back( A) onto a flat table or panel.
Align the mounting positions on chair back(A) to the mounting
positions on chair seat frame.
Use your left hand to push the seat frame floorwards, depicted by
Arrow 1.
This action helps to ensure the chair seat(B) is pressed towards to
the chair back(A) with no gap between these.
Then, lock the middle mounting positions(use Blot b) and the corner
mounting positions(use Bolt a).
The hardware for these are : use 4 Bolts (a)+ 2 Bolts (b)+6 Flat
Washers (d) + 6 Spring Washers (e) with the Allen key(f).
At this point of assembly, DO NOT overfasten the connections.
4 of 7