Installation Instructions

2
1A
1
1
Secure the mounting plate to the junction box.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Place the fixture onto the threaded nipple and secure it in place by screwing the cap nut onto the nipple from the inside
of the fixture.
Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information.
For wet locations, caulk around the base of the fixture with waterproof construction sealant.
1
2
3
4
5
6
7
3
4
6
NEUTRAL WIRE
HOT WIRE
WHITE WIRE
BLACK WIRE
THREADED NIPPLE
Install the Fixture
MOUNTING
PLATE
JUNCTION BOX
7
FIXTURE
CAP NUT
LAMP
5