Club Chair Caution: You must read this before you proceed.
Part NO.
Chair Backrest Chair Seat Front Wooden Leg Back Wooden Leg Front Wooden Leg FRONT VIEW Step 1 组装步骤线条图 Position Chair Seat on its back, as shown, on a clean, non-marring surface. Unzip to open and remove the 4 Wooden Legs. Close pouch before assembling.
Step 2 Use Gasket to achieve stability C C D D Install the Front Wooden Leg(C) at the bottom of the Sofa by placing one Gasket(1) on the threaded stem. Then insert the threaded stem into the threaded mounting postion at the corner of the Chair. Tighten by turning the Leg clockwise. Repeat the same process to install the remaining three Legs. Note : The use of Gaskets are OPTIONAL and are especially useful to help alleviate slight wobbles.
Step 3 (1) Place the Chair upright. Then push the Chair Backrest(E) downwards until the Backrest is fully slotted and locked into position as shown in the picture(1). Step 4 Make sure all parts are connected and securely locked into position. Your Chair is ready for use.
Page 6 OF 6
