Installation & Assembly

Attach the Spring (J) to the Left Leg (P2) using one Socket Screw (A) as shown in

Illustration #5. Hook the other end of the Spring into the Lock Rod (P7) as shown.

Repeat this Step for the Spring (J) to the Right Leg (P#) and Lock Rod (P7).

6.)

Illustration #5

Attach the Modesty Panel (P4) between the Right Leg (P3) and the Left Leg (P2) using two

Socket Screws (A) into the threaded holes in each leg. Make sure your Modesty Panel (P4)

is positioned as shown in Illustration #6.

7.)

Illustration #6

Place a Lock Washer (G) on each Caster (D1) and screw into the back holes in the bottom of the

Right and Left Legs. Place a Lock Washer (G) on each Caster (D) and screw into the front holes

in the bottom of the Right and Left Legs as shown in Illustration #6. Tighten all Casters with

Caster Wrench (F).

8.)