Installation & Assembly

ManualsBrandsLatitude Run ManualsClassroom & Training FurnitureWestfall Flipper Training Table with Caster Wheels

123456789012345678901234567890121234567890123456789012345678901212345678901234

Flipper Table

Rectangular

Assembly Instructions

Summary of content (6 pages)

PAGE 1
23456789012345678901234567890121234567890123456789012345678901212345678901234 123456789012345678901234567890121234567890123456789012345678901212345678901234 123456789012345678901234567890121234567890123456789012345678901212345678901234 123456789012345678901234567890121234567890123456789012345678901212345678901234 123456789012345678901234567890121234567890123456789012345678901212345678901234 123456789012345678901234567890121234567890123456789012345678901212345678901234 12345678901234567890123456789012123456
PAGE 2
Part Drawing Description Part Qty Drawing Description Qty Hardware List P1 P2 P3 P4 P5 Table Top Left Leg Right Leg Modesty Panel Top Support P6 Handle P7 Lock Rod 1 EA A M6*12mm Socket Screw 8 EA B M6*45mm Socket Screw 5 EA B1 M6*57mm Socket Screw 2 EA C Plastic Grommet 2 EA D 2” Locking Caster 2 EA D1 2” Caster 2 EA E Allen Wrench 1 EA F Caster Wrench 1 EA G Lock Washer-Caster 4 EA 1 EA 1 EA 1 EA 1 EA 2 EA 1 EA 2 H Wood Screws 4 EA I Connecting Brack
PAGE 3
Assembly Diagram READ THROUGH INSTRUCTIONS FROM BEGINNING TO END BEFORE STARTING TO ASSEMBLE UNIT. 1.) Identify and Separate all the Parts and Hardware. 2.) Place the Table Top (P1) face down on a padded surface. Place the Left Leg (P2) over the embedded threaded inserts in the bottom of the Table Top. Attach the Left Leg to the Table Top using two Socket Screws (B) as shown in Illustration #1. B P1 P2 Illustration # 1 3.) Attach the Top Support (P5) to the Left Leg (P2) using one Socket Screw (B1).
PAGE 4
.) Place the Lock Rod (P7), as shown in Illustration #3, against the Left Leg (P2) and align holes. Insert the Handle (P6) through the outside hole in the Left Leg (P2) and into the hole the the Lock Rod (P7). Align the screw holes and secure with one Socket Screw (A). P6 A Illustration #3 P2 5.) P7 Place the Right Leg (P3) over the embedded threaded holes in the bottom of Table Top (P1).
PAGE 5
6.) Attach the Spring (J) to the Left Leg (P2) using one Socket Screw (A) as shown in Illustration #5. Hook the other end of the Spring into the Lock Rod (P7) as shown. Repeat this Step for the Spring (J) to the Right Leg (P#) and Lock Rod (P7). P2 J P7 A Illustration #5 7.) Attach the Modesty Panel (P4) between the Right Leg (P3) and the Left Leg (P2) using two Socket Screws (A) into the threaded holes in each leg. Make sure your Modesty Panel (P4) is positioned as shown in Illustration #6.
PAGE 6
Cap Sleeve C P1 9.) 10.) To install Grommets (C), separate parts and press Grommet Sleeves into the round opening in the Top Platform (P1) as shown in Illustration #7. Snap 2 plastic Caps over top of the Sleeves as shown in Illustration #7. Illustration #7 11.) Use two Connecting Brackets(I) and four Wood Screws(H) to secure two tables together as shown in Illustration #8.