Assembly Instructions (Table)







#1-
Page 5 of 6
\
)
I. Carefully place the base (#4) on its side.
II. Align the legs (#2) to the pre-drilled holes located on the corners of the base (#4).
III. Prepare 8 bolt assemblies by FIRST inserting a lock washer (#B) onto the bolt (#E)
then a flat washer (#C) onto that SAME bolt (#E), in that order. Insert into the pre-
drilled holes and secure using the Allen wrench (#D).
I. Carefully place the table top (#1) onto a protected surface.
II. Align the legs (#2) to the pre-drilled holes located on the
bottom of the table top (#1).
III. Prepare 8 bolt assemblies by FIRST inserting a lock
washer (#B) onto the bolt (#A) then a flat washer (#C) onto
that SAME bolt (#A), in that order. Insert into the pre-drilled
holes as shown and secure using the Allen wrench (#D).