Console Table Hardware?
PAGE:2 OF 8 PARTS IDENTIFICATION 14 12 Please count and verify all parts before assembly (1) 1pc (8) 1pc (15) 1pc (2) 1pc (9) 1pc (16) 1pc (3) 1pc (10) 1pc (17) 1pc (4) 1pc (11) 1pc (18) 1pc (5) 1pc (12) 1pc (19) 1pc (6) 1pc (13) 1pc (20) 1pc (7) 1pc (14) 1pc
PAGE:3 OF 8 HARDWARE IDENTIFICATION A Large Cambolt B Large Camlock C Large Dowel D Midium Screw E Small Cambolt F Small Camlock G Small Screw H Large Screw I J Small Dowel K Bracket L Bracket Screw M Glue Insert camlock， camlock must face bolt hole ∅4×30 ∅12 (BK) Foot Pin Gently screw cam dowel into the threaded anchor (BK) Lightly glue one end of woode dowel and tap into hole.
PAGE:4 OF 8 Step1 1.Attach hardware to pieces as shown. 2.Attach (1) to leg (3) and leg (4) using care not to overtighten camlocks. NOTE: *REFER TO PAGE 3 FOR CAMLOCK INSTRUCTIONS. Step2 Screw (5) and (6) into leg assemblies using screws (D) . Step3 G×6 1.Screw (8) and (7) into leg assemblies with screws (G). 2.Connect assemblies together with (9) and camlocks,using care not to overtighten.
PAGE:5 OF 8 Step4 REAR LEG ASSEMBLY Connect legs (10 ) and (11) to back panel (12) with camlocks,be careful not to overtighten. 12 Step5 1.Attach hardware to rear leg assembly. 2.Insert camlocks into front leg assembly. 3.Connect front and rear assemblies together with camlocks and large screws (H). 4.Turn unit upside down and gently hammer foot pins (J) into legs.
PAGE:6 OF 8 Step6 1.Attach hardware to tabletop (14) and insert camlocks into leg assembly. 1 2.Place top (14) onto assembly and gently tighten camlocks. Step7 1.Turn unit upside down on carpet or soft surface. 2.Attach bottom shelf (13) to table using brackets (K) and barcket screws (L).
PAGE:7 OF 8 Step8 DRAWER ASSEMBLY Carefully connect side panels (16)&(17) to back panel (15) using medium screws (D). 17 15 Step9 1.Slide drawer bottom panel (18) into grooves of drawer assembly. 18 2.Place support bar (19) over bottom panel (18) and connect with small screws (G). Step10 1.Attach hardware to drawer front panel (20) and insert camlocks into drawer sides. 2.Connect drawer front panel to drawer and tighten camlocks.
PAGE: 8 OF 8 Step11 Carefully slide drawer into table. 14 Enjoy your new quality piece of furniture.
