Installation & Assembly

I. Align the two brackets (#H) with the
pre-drilled holes of the leg (#2).
II. Secure the brackets (#H) using the
Allen wrench (#G) to tighten the 4
bolts (#B) to lock them with the leg
(#2).
III. Repeat the process above for the
remaining 3 legs.
I. With the help of another person,
carefully place the table top (#1)
facing down on a protective surface.
Align the brackets (#H) assembled
onto the two legs (#2) with the pre-
drilled holes on the table top (#1).
II. Prepare 8 bolt assemblies by inserting
FIRST the lock washer (#F) onto the
bolt (#A) and then the flat washer (#D)
onto the SAME bolt (#A), in that order.
III. Insert the bolt assemblies through the
holes of the brackets (#H) and secure
those bolts using the Allen wrench
(#G) to lock them with the table top
(#1).
Turn right (clockwise) to tighten
Turn right (clockwise) to tighten
Page 5 of 7
#A x 8 pcs
#D x 8 pcs
#F x 8 pcs
#B x 16 pcs
#H x 8 pcs