Installation & Assembly
A: 4-1/2"
B: 19-1/2" ~ 58-1/2"
A
B
Fig. 2
Outlet Box
Support Brace
Canopy
Coupling Kit
4. Attach the nipple to the mounting strap, then secure it with lock nut.
5. Attach the mounting strap to outlet box by using two mounting screws.
6. Pull out the outlet wires and the house grounding wire from the outlet box.
Make wire connections by
using the wire nuts:
---The black (hot) wire from fixture to the black (hot) wire from power source.
---The white (neutral) wire from fixture to the white (neutral) wire from power
source.
---Attach the fixture grounding wire to the mounting strap with the green
grounding screw. Then connect it to the house grounding wire with the
wire nut.
Carefully put the wires back into the outlet box.
7. Attach the canopy to the mounting strap, and secure it with collar.
8. Hold the socket into the interior glass shade, thread the three set screws-1
through each holes of interior glass shades, and then secure them into the
support.
9. Place the interior glass shade into the center of exterior
glass shade and metal ring, then thread the three set
screws-2 through each holes of metal ring and exterior
glass shades, secure them into the set screws-1.
10. Pushing up the glass shade, make the socket to show
outside the glass shade. Install a bulb (not included).
See relamping label at socket area or packaging for
maximum allowed wattage. (See Fig. 1)
11. Turn on the power at the main fuse or circuit breaker box.
12. Angled mounting recommended for a vaulted or
angled ceiling. (See Fig. 2)
Glass Shade
Scoket
Bulb
Fig. 1